3D Printed Accessories for Celestron NexStar Telescope

Description

I have several 3d printed accessories for Celestron Nexstar SE series.
1. Accessories tray/leg spreader. It has 5 holes for 1.25" eyepieces and 2 holes for 2" eyepieces. It weighs 2.5oz and fits Celestron Nexstar 4se, 5se, 6se and 8se
2. 1.5" tripod leg mount hand controller holder. It weighs 0.6oz and fits Celestron Nexstar 4se, 5se, 6se and 8se
3. 2.75" diameter focuser. It weighs 0.5oz and fits 5se, 6se and 8se
4. A dust cap that fits Celestron Autoalign camera. I added an ear to it so you can secure it to the camera body with a lanyard or strap. It weighs 0.2oz.
5. Locking knob for the accessories tray rod. It's called "leg brace locking knob" in Celestron's manual. It fits all Celestron models with the M12-1.75 center support rod, including Celestron Nexstar 6se and 8se. If you don't know what M12-1.75 means, you can take a measure of the diameter of your rod. If it's around 0.45" this knot will fit. The knob is 3d printed, and the zinc nut was snapped in when the print was hot so a tight fit is achieved when it cooled down and shrunk in size. In case the nut gets loose you can always glue it back to the kbob.
1, 2, 3 and 5 are strong and rigid parts printed with ABS, while 4 (the dust cap) is using TPU to allow some flexibility and elasticity (feels like hard rubber).
Combined Shipping:
These items are very light so they're eligible for USPS first class mail which costs around for a package under 15oz. Combined shipping will automatically be applied so the shipping is around given your combined purchases are below 15oz. Feel free to contact me if you receive an abnormally high shipping charge, e.g., over .