QHY 5-II Monochrome Planetary / Guide CMOS Camera with ST4 Cable

Description

QHY5L-II-M CMOS Planetary Monochrome Camera with ST4 Cable.  Rarely used.  In original container with all pieces.
Aptina 1/3” MT9M034 CMOS Sensor
1280 x 960 pixels
Small pixel size of 3.75um
USB and ST4 interface
QE of 74%
The QHY5L-II is the size of a 1.25” eyepiece and sports the 1.23 Megapixel Aptina MT9M034 monochrome CMOS sensor, which features high sensitivity and low noise. With an unbelievable 74% QE, the QHY5L-II's sensitivity exceeds many CCD sensors. The readout noise can reach as low as 4 electrons, and the sensor's on-chip FPN (Fixed Pattern Noise) calibration function keeps the image clear and uniform even under high gain. With these advantages, the QHY5L-II produces outstanding image quality for planetary imaging, guiding, deep sky imaging or when using in conjunction with a wide angle lens as an all sky camera.
The QHY5L-II also offers high-speed data transfer performance. It can achieve 30 FPS at full resolution and 200 FPS at 320x240. This frame rate is quite good for planetary capture.
Both native WDM drivers and Broadcast WDM drivers are supplied with the QHY5L-II. This means you can use it as an ultra high-performance webcam or for live video broadcasts. You can show your friends what’s happening in the sky in real-time with this camera.
Aptina MT9M034 Sensor Specifications
Optical Format: 1/3 inch
Active Pixels: 1280 x 960
Sensor Size: 4.83mm x 3.63mm
Pixel Size: 3.75um
Shutter Type: Electronic Rolling
Max Frame Rate: 30 FPS progressive scan
ADC Resolution: 14-bit, on chip, 8-bit/12-bit output
Dynamic Range: >115 dB
Binning: 1*1
Exposure Min & Max: 20us - 10 minutes
QE: 74% peak